Soil suspension/dispersion modeling methods for estimating health-based soil cleanup levels of hexavalent chromium at chromite ore processing residue sites

The primary health concern associated with exposures to chromite ore processing residue (COPR)-affected soils is inhalation of hexavalent chromium [Cr(VI)] particulates. Site-specific soil alternative remediation standards (ARSs) are set using soil suspension and dispersion models to be protective of the theoretical excess cancer risk associated with inhalation of soil suspended by vehicle traffic and wind. The purpose of this study was to update a previous model comparison study that identified the 1995 AP-42 particulate emission model for vehicle traffic over unpaved roads and the Fugitive Dust Model (FDM) as the most appropriate model combination for estimating site-specific ARSs. Because the AP-42 model has been revised, we have updated our past evaluation. Specifically, the 2006 AP-42 particulate emissions model; the Industrial Source Complex-Short Term model, version 3 (ISCST3); and the American Meteorological Society/Environmental Protection Agency Regulatory Model (AERMOD) air dispersion models were evaluated, and the results were compared with those from the previously used modeling approaches. Two sites with and two sites without vehicle traffic were evaluated to determine if wind erosion is a significant source of emissions. For the two sites with vehicle traffic, both FDM and ISCST3 produced total suspended particulate (TSP) estimates that were, on average, within a factor of 2 of measured; whereas AERMOD produced estimates that were as much as 5-fold higher than measured. In general, the estimated TSP concentrations for FDM were higher than those for ISCST3. For airborne Cr(VI), the ISCST3 model produced estimates that were only 2- to 8-fold of the measured concentrations, and both FDM and AERMOD estimated airborne Cr(VI) concentrations that were approximately 4- to 14-fold higher than measured. Results using the 1995 AP-42 model were closer to measured than those from the 2006 AP-42 model. Wind erosion was an insignificant contributor to particulate emissions at COPR sites.     

Transport and biodegradation of perchlorate in soils

Perchlorate (ClO4-) contamination of ground water and surface water is a widespread problem, particularly in the western United States. This study examined the effect of biodegradation on perchlorate fate and transport in soils. Solute transport experiments were conducted on two surface soils. Pulses of solution containing perchlorate and Br- were applied to saturated soil columns at steady state water flow. Perchlorate behaved like a nonreactive tracer in Columbia loam (coarse-loamy, mixed, superactive, nonacid, thermic Oxyaquic Xerofluvent) but was degraded in Yolo loam (fine-silty, mixed, superactive, nonacid, thermic Mollic Xerofluvent). Batch experiments demonstrated that perchlorate removal from solution in Yolo loam was caused by biodegradation. Other batch experiments with Yolo loam surface and subsurface soils, Columbia loam surface soil, and dredge tailings demonstrated that perchlorate biodegradation required anaerobic conditions, an adequate carbon source, and an active perchlorate-degrading microbial population. The sequential reduction of perchlorate and NO3- by an indigenous soil microbial community in Yolo loam batch systems was also studied. Nitrate reduction occurred much sooner than perchlorate reduction in soils that had not been previously exposed to perchlorate, but NO3- and perchlorate were simultaneously reduced in soils previously exposed to perchlorate. The results of this study have implications for in situ remediation schemes and for agricultural soils that have been contaminated by perchlorate-tainted irrigation water.     

LAKE ONTARIO REGULATION UNDER TRANSPOSED CLIMATES1

ABSTRACT: The implications of Lake Ontario regulation under transposed climates with changed means and variability are presented for seasonal and annual time scales. The current regulation plan is evaluated with climates other than the climate for which it was developed and tested. This provides insight into potential conflicts and management issues, development of regulation criteria for extreme conditions, and potential modification of the regulation plan. Transposed climates from the southeastern and south central continental United States are applied to thermodynamic models of the Great Lakes and hydrologic models of their watersheds; these climates provide four alternative scenarios of water supplies to Lake Ontario. The scenarios are analyzed with reference to the present Great Lakes climate. The responses of the Lake Ontario regulation plan to the transposed climate scenarios illustrate several key issues: (1) historical water supplies should no longer be the sole basis for testing and developing lake regulation plans; (2) during extreme supply conditions, none of the regulation criteria can be met simultaneously, priority of interests may change, and new interests may need to be considered, potentially requiring substantial revision to the Boundary Waters Treaty of 1909; (3) revised regulation criteria should be based on ecosystem health and socio-economic benefits for a wider spectrum of interests and not on frequencies and ranges of levels and flows of the historical climate; and (4) operational management of the lake should be improved under the present climate, and under any future climate with more variability, through the use of improved water supply forecasts and monitoring of current hydrologic conditions.     

Large particles are responsible for elevated bacterial marker levels in school air upon occupation

Muramic acid (Mur) is found in bacterial peptidoglycan (PG) whereas 3-hydroxy fatty acids (3-OH FAs) are found in Gram-negative bacterial lipopolysaccharide (LPS). Thus Mur and 3-OH FAs serve as markers to assess bacterial levels in indoor air. An initial survey, in a school, demonstrated that the levels of dust, PG and LPS (pmol m(-3)) were each much higher in occupied rooms than in the same rooms when unoccupied. In each instance, the Mur content of dust was increased and the hydroxy fatty acid distribution changed similarly suggesting an alteration in the bacterial population. Here, findings are compared with results from two additional schools. Follow-up aerosol monitoring by particle size was also performed for the first time for all 3 schools. The particle size distribution was shown to be quite different in occupied versus unoccupied schoolrooms. Within individual classrooms, concentrations of airborne particles [greater-than-or-equal]0.8 [micro sign]m in diameter, and CO(2) were correlated. This suggests that the increased levels of larger particles are responsible for elevation of bacterial markers during occupation. Release of culturable and non-culturable bacteria or bacterial aggregates from children (e.g. from flaking skin) might explain this phenomenon.     

The post-Bhopal and post-9/11 transformations in chemical emergency prevention and response policy in the United States

The United States' approach to incident prevention and response to hazardous chemical facilities has undergone two major transformations in the last 20 years. The first was triggered by the Bhopal tragedy in 1984, which led to major changes within the US chemical industry and a series of Federal laws and regulations intended to prevent major chemical accidents. A more recent transformation is currently underway in the wake of the 9/11 attacks on New York and Washington. It involves the advent of various security-related requirements affecting many of the same facilities covered under the existing accident prevention rules. This paper provides an overview of these transformations and their impacts.     

Use of AMS in the marine environment

In recent years, the field of AMS has expanded into many areas of science. This paper reviews a variety of applications of AMS in the marine environment, focusing particularly on recent developments and applications. Following a brief summary of the three main isotope techniques used in environmental studies: dating, tracing and source identification, a number of applications are considered. Traditional (14)C-dating is no longer the dominant application of AMS measurements, and together with measurements of (10)Be, (26)Al and (36)Cl, much of the research is now directed towards an understanding of global climate change via studies of oceanic circulation, atmospheric processes and past climates by cosmic ray exposure dating. Profiles of long-lived cosmogenic radionuclides in sediments and ice cores, as a function of depth and, thus, age, provide key information on past solar variability, production rate changes and atmospheric transport and deposition mechanisms. Useful paleoclimatic information may be derived from these archives both because deposition is influenced by climate and because solar activity (which influences production) and solar radiance (which influences climate) are correlated. In recent years, emphasis has been put on the development and application of AMS techniques for the measurement of heavier long-lived isotopes, including (99)Tc, (129)I, (236)U and other actinide isotopes. AMS combines ultra low detection limits and the possibility to analyse isotope ratios that can be difficult with traditional instruments and has been used in a number of applications on the consequences and uses of releases from nuclear energy. Finally, the use AMS in environmental sciences is expected to expand further in the foreseeable future with long-lived cosmogenic radionuclides contributing to a large body of knowledge on processes involving atmosphere, oceans, ice sheets, biosphere, soils and sediments.     

Evaluation of data quality in lichen biomonitoring studies: the Italian experience

A total of 65 operators involved in lichen mapping studies in central and northwestern Italy underwent quality control tests during five lichen biomonitoring workshops organized between 1999and 2000. The results showed that 75% quantitative accuracy and90% quantitative precision can be regarded as satisfactory levels for lichen biodiversity data; 65% proved to be sufficientfor accuracy of taxonomic identification in the field. Average correct assignment of the interpretative naturality/alteration class was only 48.7%. The results indicated the need for taxonomic training.     

Comparing environmental influences on coral bleaching across and within species using clustered binomial regression

Differential susceptibility among reef-building coral species can lead to community shifts and loss of diversity as a result of temperature-induced mass bleaching events. We evaluate environmental influences on coral colony bleaching over an 8-year period in the Florida Keys, USA. Clustered binomial regression is used to develop models incorporating taxon-specific responses to the environment in order to identify conditions and species for which bleaching is likely to be severe. By building three separate models incorporating environment, community composition, and taxon-specific responses to environment, we show observed prevalence of bleaching reflects an interaction between community composition and local environmental conditions. Environmental variables, including elevated sea temperature, solar radiation, and reef depth, explained 90% and 78% of variability in colony bleaching across space and time, respectively. The effects of environmental variables were only partially explained (33% of variability) by corresponding differences in community composition. Taxon-specific models indicated individual coral species responded differently to local environmental conditions and had different sensitivities to temperature-induced bleaching. For many coral species, but not all, bleaching was exacerbated by high solar radiation. A 25% reduction in the probability of bleaching in shallow locations for one species may reflect an ability to acclimatize to local conditions. Overall, model results indicate predictions of coral bleaching require knowledge of not just the environmental conditions or community composition, but the responses of individual species to the environment. Model development provides a useful tool for coral reef management by quantifying the influence of the local environment on individual species bleaching sensitivities, identifying susceptible species, and predicting the likelihood of mass bleaching events with changing environmental conditions.